雙組份打膠機的工作原理

Working principle of two-component gluing machine

　　雙組份打膠機主要由A、B兩組份膠泵、氣動系統、升降機構、混合器和膠槍等部分組成。其工作原理如下：

The two-component glue machine mainly consists of A and B component glue pumps, pneumatic system, lifting mechanism, mixer, and glue gun. Its working principle is as follows:

　　膠泵工作：A、B兩組份膠泵分別由獨立的氣馬達驅動，通過往復運動將膠體吸入并壓出。A、B膠泵分別與壓膠盤固定在一起，通過氣動系統控制其運動。

Glue pump operation: The A and B components of the glue pump are driven by independent air motors, which suck and press out the glue through reciprocating motion. A. The B glue pump is fixed together with the pressure plate and its movement is controlled by a pneumatic system.

　　比例調節：通過比例杠桿調節B組份膠的出膠量，從而控制A、B膠的混合比例。比例調節范圍通常在6:1到14:1之間。

Proportional adjustment: Adjust the dispensing amount of component B glue through a proportional lever to control the mixing ratio of A and B glue. The proportional adjustment range is usually between 6:1 and 14:1.

　　混合與輸出：A、B兩組份膠在混合器中充分混合后，通過膠槍輸出到施工部位?；旌掀鞑捎渺o態往復管式設計，確?；旌暇鶆颉?/p>

Mixing and output: After the A and B components are fully mixed in the mixer, they are output to the construction site through a glue gun. The mixer adopts a static reciprocating tube design to ensure uniform mixing.

　　氣動控制：整個系統通過氣動系統控制，包括膠泵的驅動、升降機構的操作以及膠槍的開關。

Pneumatic control: The entire system is controlled by a pneumatic system, including the drive of the glue pump, the operation of the lifting mechanism, and the switch of the glue gun.

　　雙組份打膠機的應用優勢

Application advantages of two-component gluing machine

　　1、高效施工

1. Efficient construction

　　雙組份打膠機能夠在短時間內完成大量膠體的混合與輸出，大大提高了施工效率。例如，某些型號的打膠機一小時可以輸出30 - 45公斤的密封膠。

The two-component glue machine can complete the mixing and output of a large amount of colloids in a short period of time, greatly improving construction efficiency. For example, some models of glue dispensers can output 30-45 kilograms of sealant per hour.

　   2、精準控制

2. Precise control

　　通過精確的比例調節和穩定的輸出流量，雙組份打膠機能夠確保膠體混合的均勻性和施工質量。其比例精度誤差小于±2%，能夠滿足不同膠種和施工要求。

By precise proportional adjustment and stable output flow, the two-component gluing machine can ensure the uniformity of colloid mixing and construction quality. Its proportion accuracy error is less than ± 2%, which can meet different adhesive types and construction requirements.

　　3、操作簡便

3. Easy to operate

　　雙組份打膠機的操作簡單，只需調整氣源壓力和比例杠桿即可完成設置。其氣動系統和膠槍設計使得操作更加靈活和方便。

The operation of the two-component glue machine is simple, just adjust the air source pressure and proportional lever to complete the setting. Its pneumatic system and glue gun design make operation more flexible and convenient.

　　4、適用性強

4. Strong applicability

　　雙組份打膠機適用于多種膠種，包括雙組份聚硫膠、硅酮結構膠等。其高壓柱塞泵能夠適應高粘度流體的輸送，確保施工的順利進行。

The two-component glue machine is suitable for various types of glue, including two-component polysulfide glue, silicone structural glue, etc. Its high-pressure plunger pump can adapt to the transportation of high viscosity fluids, ensuring the smooth progress of construction.

本文由雙組份打膠機友情奉獻.更多有關的知識請點擊:http://m.dgjiaxing.com.cn我們將會對您提出的疑問進行詳細的解答，歡迎您登錄網站留言.

This article is a friendly contribution from a two-component glue machine For more information, please click: We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message